Small Combine Harvester (4L-0.6)

• Model NO.: (4L-0.6)

Product Description

 

Small Combine Harvester (4L-0.6)  

This machine is a reference to JB/T5117-2006 of the People's Republic of China machinery industry standard "full feeding combine technical conditions" for production and processing, to produce a product conforms to the standards set by the state. Part of the design is the latest research results of the company, belongs to the category of patent protection.

 

Model	4L-0.6 Drum-Type Combine Harvester
Whole Machine Weight (KG)	115-130
Cutting Width (MM)	600
Production Efficiency (Mu/Hour)	0.8-1.2
Power (HP)	5.5
Processing Type	Thresher for Wheat and Rice

  

  Preparation before operation

Machine should check each component before work, ensure that all parts in good condition, the fault should be ruled out in time. Check each part bolts, such as loose must tighten. Clean up after the previous homework residue and sundry grain, the machine to conduct a comprehensive inspection, bearing the rotary parts are lubricating oil will be listed in each shift.

 

1, cleaning machine, clear the ying on the machine shell, chopped stalks and other attached objects, all lubrication friction parts in time, outside the chain to clean, and oil lubrication.

2, engine technical status of inspection, including oil pressure, oil temperature is normal, the engine sound, such as fuel consumption is normal. Detection engine is functioning normally. 

3, harvesting of check and adjustment, including the speed and height of the wheel is designed, cutter and cutting clearance journeys, stirring dragons and underside clearance and stirring speed dragon size is in line with the requirements.

 

4, fire extinguisher inspection and installation, check whether portable fire extinguisher expired, if want to let the machine to carry, can be fixed on the frame; Also can carry alone, in case of emergency.

 

5, check the harvester headlamps and maintenance lamp is normal, headlamps, maintenance lamp according to the needs of the users themselves, connect wires on the motor installed in reliable position on your own design.

 

6, other project inspection. Whether weldments have crack, all kinds of machine oil is clean enough, rotating parts movement is flexible, reliable and controlling device is flexible, accurate and reliable, walking and parking brake device is normal, should be accurate when using, machine to work in spite of is prohibited.

7.Check each part bolt fastening situation, if there are any loose, must be retightened. Then with dynamic articulated. Power must match the machine, the size of the disposal. Hanging belt, and adjust the consistence, too loose belt skid cause lack of speed, and effect to use even poor block, slag discharge machine, too tight, causing overload and affect the service life of the machine bearing a fever. Hand toggle pulley, adjust the tension pulley, confirm the transmission system is in normal state. Start the machine, confirm the correct direction of rotation is confirmed after, boot idle running 5 ~ 10 minutes, should be no abnormal vibration and noise (all personnel shall be far away from the machine) at this time, everything is normal and correct rear can put into work.