Color Aluminum Oxide Aluminum Alloy Bender

• Customization: Available
• Certification: CE
• Handle Material: Aluminum
• Model NO.: CT-C999
• Folded: Unfolded
• Brand: OEM
• Quality Grade: Professional Level
• Material: Aluminum
• Transport Package: Carton
• Specification: 3.3kg
• Trademark: OEM
• Origin: China
• Package Size: 50.00cm * 40.00cm * 20.00cm
• Package Gross Weight: 7.600kg

Product Description

Tube Bending Instruction
Prepare before bending-universal crossbar and former install
Insert correct size former in dented rod, then place correct size universal crossbar on housing and tightened it by a wing screw.
Notice: There are 2 pairs of sliding pieces with sized slots on universal crossbar. We must choose the same size sliding pieces with sized slots and face them to the former slot. (Sizes are engraved on formers and sliding pieces)

Prepare before bending-placing a tube
Upright the bender housing and pull out the feed lever. Former with dented rod will retract back under the effect of gravity. Turn the sliding pieces with correct size slots and face them to the former slot. Then place the tube between former and sliding pieces.

Bending-Push the feed lever repeatedly
Push the feed lever repeatedly until the tube is bended to a certain angle you need.
Notice: Maximum angle is 90 degrees

Bending finished-take the bended tube out
Upright the bender and pull out the feed lever. Former with dented rod with retract back under the effect of gravity. Take the bended tube out. If the bended tube gets stuck in the former slot, remove them from housing together.

Bending finished-take out the stuck tube
Hold the tube with one hand and use some tools such as hammer to strike the former in the position in figure.
Notice: Don't strike the tube.

Weight

7.6kg